Digital coating thickness gauge CM-8856 for Powder Coating Thickness

Application of Digital coating thickness gauge CM-8856

^{_{It used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage}}

tanks, etc .in industries of petroleum, shipbuilding, power station, and machine manufacturing.

Magnetic sensor to measure the non-ferromagnetic coatings on steel, iron and other ferromagnetic metal matrix coating, such as: paint, powder, plastic, rubber, synthetic material, phosphide layer, chromium, zinc, lead, aluminum, tin,cadmium, porcelain, enamel, oxide. Eddy current sensor to measure the enamel substrate such as copper, aluminum, zinc, tin, rubber, paint, plastic layer. Widely used in the field of manufacturing, metal processing industry, chemical industry, commodity inspection and other testing.

• Descpription of the panel

3-1 Probes Inbuilt      3-2 Display

3-3 Power/Zero Key   3-4 Plus Key

3-5 Minus Key            3-6 Reading Key

3-7 Deleting Key         3-8 Jack forRS232C

3-9 Battery cover        3-10 Wrist Ring

Features of Powder Coating Thickness Gauge meter CM8822

• Measure thethickness of non-magnetic coatings on magnetic or non-magnetic metal substrates

• Choice ofremote probe; F probe measures the thickness of non-magnetic coatings onmagnetic metal substrates; N probe measures the thickness of non-magneticcoatings on non-magnetic metal substrates

• Automatic probe recognition

• Automatic calibration

• Large,easy-to-read LCD provides exact readings without guessing or errors

• µm/milconversion switch

• Includeshard carrying case and batteries

Specification of Digital coating thickness gauge CM-8856

• Display: 4 digits LCD, backlit

• Range: 0~1250 μm/0~50mil

• Resolution: 0.1 μm (0~99.9μm)1 μm (over 100μm)

• Accuracy:±1~3%n or 2.5 μm or 0.1mil(Whichever is the greater)

• PC interface:with RS-232C interface

• Power supply: 2x1.5 AAA(UM-4) battery

• Operating condition:Temp. 0~50℃

• Humidity <95%

• Size: 126x65x35 mm5.0x2.6x1.6 inch

• Weight: about 81g(not including batteries)

Accessories for Digital coating thickness gauge CM-8856:

• Carrying case ...................1 pc.
• Operation manual ............ 1 pc.
• F probe in built .................1 pc.
• NF probe in built...............1 pc.
• Calibration foils ..............1set.
• Substrate (Iron) ................1 pc.
• Substrate (Aluminium)......1 pc.
• Optional accessories:RS-232C cable & software and USB adaptor for RS-232C

Optional Model for  Powder Coating Thickness Gauge meter-CM8822