PGC1 electrostatic manual powder coating machine

PGC1 electrostatic manual powder coating machine

1.45L powder hopper
2.suitfor COATING complicated workpiece
3.economic type

Interchanged with PGC1. And the spray gun is PG1 .

Technical Data:

this machine is good for  powder coating rims or powder coating wheels

Manual Powder Coating System

 Hopper Feed 55L

largest electrostatic voltage: 90-100kv

 Min. Compressor 87 PSI,

 Hose Length 17 Ft,

 For Use With All Powder Paints

Include powder spray gun, Control Unit, powder hopper, Powder Injector, Trolley and Vibration System, Cables and Hoses

Quick Details:

Manual coating equipment Function description 

the powder gun through the powder hose . The powder is electrostatically

charged at the nozzle of the gun. In addition, an electrostatic field is

created between the gun nozzle and the grounded object. The charged

powder spray remains adhered to the surface of the object.

The powder is fluidized by air forced through a porous plastic plate from

below. The powder acquires, thereby, fluid-like characteristics.

The conveying air, supplementary air, and rinsing air are set on the control Unit

Technical Data

Power range                                   220v/110v

Frequency                                     50/60HZ

Temperature range in use                      -10 °C+50 °C

Powder Gun

Gun weight:    ………………                    500G

Rated output voltage ………                      24VDC

Input voltage     ……………                       - 200kv

Maximum output current  ………                   180Ua(max)

Maximum output voltage…………                   0-100KV (  adjustable)   

Maximum powder injection :………                    600g/min

Polarity ………………                                negative (-)  

Pneumatic technical spec

Maximum input-air pressure …………..                 8kg/cm

Optimum input-air pressure……..                        6kg/cm

Minimum input-air pressure   ……                      4kg/cm

Maximum water vapor content or compressed air …..      1.4g/N m3 

Maximum oil vapor content of compressed air   ……..     0.1ppm

Maximum cimpressed-air consumption………            13.2 m3/h

Including following parts

control unit with a trolley

control unit power supply cable

air filter

air pressure regulator

fluidized powder hopper (45L)

A plug-in injector

manual powder gun with gun cable,

Powder hose

rinsing air hose and standard nozzle set.

Pneumatic hoses for conveying air (red),

Supplementary air (black)

fluidizing air (black)

powder hose

Ground wire

Electrostatic powder coating manufacture in China,Electrostatic Powder Coating Machine,Powder spraying gun, powder spray gun, metallic powder coating system, electrostatic powder spraying unit, electrostatic powder spraying.electrostatic spray application system,Surface Finishing Equipment.